Smart Home. Monday , September 03rd , 2018 - 22:06:29 PM
A light controller circuit is connected to a motion dedicator sensor. The motion sensor triggers the lighting controller using its relay when it detects a motion in its area of control. What you should be careful about is that many lighting controllers turn off the lights in the room if its motion sensor does not detect any movement for a specific period of time passes measured by the timer on the lighting control itself. Unfortunately this behavior of the light controller systems can not be claimed as smart. This process is very simple and can not bring a solution against the human complex life style and requirements. Lets assume that you are resting in a room and staying motionless. After sometime the lights will be switched off. And you will have to move, wave your hands in order to trigger the motion sensor and then the light controller to get back the lights switched on.
The concept behind the smart home is that an automation system will be able to operate systems around the house. The variety of potential options are considerable and includes environmental systems (lighting, heating, climate control etc.), entertainment systems, individual appliances, and home security systems. While the idea is that many operations can be automated - thus saving the home owner time and effort - these systems can also be user controlled. An example would be being able to set the heating to come on later if you were going to get home later or telling the entertainment system to find you some suitable music for working to.
While technology is becoming more and more "distributed", a central server is the standard and perfectly future-proof solution for your home. By "server" we mean a system comprising a processor, file storage and networking. The range in servers is huge - you could have a single USB drive connected to the network and call it a server, or a powerful computer with massive storage. For most people, a system with at least one hard drive and a processor less than five years old is adequate. Of course, the server should be wired directly into your network at the fastest possible connection speed. You can purchase a "DLNA" server, "NAS" server (for several hundred US dollars) or high-end system to control your entire house (several thousand or more US dollars). But in fact any personal computer, laptop or even a capable Internet router will suffice. Some internet routers have a USB port that you can connect a USB hard drive to, and the router's processor can handle the media streaming, provided the router has appropriate software installed, such as a DLNA server. You can install free DLNA or other server software on a Windows or Mac PC in minutes. Basically you can re-use an old computer to act as a home server, or buymake a new computer specially. Many networking devices run on Linux, so if you see something like a NAS or DLNA server for sale, just remember you can install Linux on an old computer and easily replicate or surpass the supposedly high performance dedicated servers for sale today. When choosing your server, make sure a) It's networking speed is at least 100Mbits b) It has plentiful storage space c) The processor is at least less than five years old. Normally, providing the network speed is very fast and the processor quite recent, spend as much money as possible on the storage, such as multiple, high-capacity hard disks.
Label :Home Automation Light Switch‚ Home Automation For Dummies‚ Home Automation News or Home Automation Gadgets‚ Home Automation Installation‚
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does mrtechforum claim ownership or responsibility for such items a and you should seek legal consent for any use of such materials from its owner.